ISG Screw System

The ISG Screw System from Marquardt offers stabilization of the posterior pelvic ring. The ISG Screw System is used for fixation of osteoporotic and non-osteoporotic fractures of the pelvis and is often used in cases of osteoarthritis or dislocation of the sacroiliac joint. The thread surfaces of ISG Screws are corrundum blasted in a subtractive process. The increased roughness of the surface structure leads to an enlargement of the implant surface which increases the primary stability of the implanted screws. Osseointegration is supported by the optimized surface structure.

The surgical technique for Marquardt ISG Screw System:

  • Marquardt ISG Screw System – PDF

Note: Please have patience for the Surgical Technique to load. The time depends on your bandwidth. 

Fully Threaded with a 7.5 mm diameter

Order No.  Length
 08.03910.050S  50 mm
 08.03910.055S  55 mm
 08.03910.060S  60 mm
 08.03910.065S  65 mm
 08.03910.070S  70 mm
 08.03910.075S  75 mm
 08.03910.080S  80 mm
 08.03910.085S  85 mm
 08.03910.090S  90 mm
 08.03910.095S  95 mm
 08.03910.100S  100 mm
 08.03910.105S  105 mm
 08.03910.110S  110 mm
 08.03910.115S  115 mm
 08.03910.120S  120 mm
 08.03910.125S  125 mm
 08.03910.130S  130 mm
 08.03910.135S  135 mm
 08.03910.140S  140 mm
 08.03910.145S  145 mm
 08.03910.150S  150 mm
 08.03910.155S  155 mm
 08.03910.160S  160 mm
 08.03910.165S  165 mm

 

Short Threaded with a 7.5 mm diameter

Order No.  Length
 08.03912.050S  50 mm
 08.03912.055S  55 mm
 08.03912.060S  60 mm
 08.03912.065S  65 mm
 08.03912.070S  70 mm
 08.03912.075S  75 mm
 08.03912.080S  80 mm
 08.03912.085S  85 mm
 08.03912.090S  90 mm
 08.03912.095S  95 mm
 08.03912.100S  100 mm
 08.03912.105S  105 mm
 08.03912.110S  110 mm
 08.03912.115S  115 mm
 08.03912.120S  120 mm
 08.03912.125S  125 mm
 08.03912.130S  130 mm
 08.03912.135S  135 mm
 08.03912.140S  140 mm
 08.03912.145S  145 mm
 08.03912.150S  150 mm
 08.03912.155S  155 mm
 08.03912.160S  160 mm
 08.03912.165S  165 mm